WELCOME TO NATECHRONY

Thank you for stopping by NateChrony at the Airgun Expo 2025. 

NateChrony: Reliable Accuracy
The most affordable and easy to use ballistic chronographs, training tools, and targets on the market. Our Chronographs feature certified accuracy from the National Measurements Institute – they are accurate, reliable, full featured, and built to last. Our new SmartTargets offer an affordable training solution for any target rquirement for any sport. We ship worldwide!

www.natechrony.com

Video from AE25 for NATECHRONY

Coming soon….

OUR VIRTUAL BOOTH

NateChrony v 2.5 Ballistic Chronograph

Colors: Black Polymer, Black Aluminium, Stone Aluminium, English Oak Aluminium

The NateChrony v2.5

The latest iteration of the most accurate Chronograph on the market, and replaces the v2 as our basic Chronograph. However it now has the same hardware as the SteadyShot, so can be upgraded via software to a SteadyShot.

The NateChrony is a barrel mounted ballistic chronograph for all Air Rifles. It is the most accurate available – calibrated from our certified master Chronographs to within 1fps @ 1,000fps. Its affordable, super easy to use, and best of all – no more missed readings! The NateChrony mounts onto your barrel with one of the adapters for perfect alignment every time.
Using your mobile phone as the screen and battery, means you get the best display on the market and never get surprised by a flat battery in your Chronograph.

Any device with Wi-Fi and a web browser – mobile phone, tablet, laptop, pc will work with the NateChrony. You connect to the NateChrony’s Wi-Fi hotspot and load a page directly from it, there’s no internet or apps to install, no permissions required or data shared.

The NateChrony is fully featured and will provide all the data even the most demanding tuner requires. It displays a current shot string, full statistics: min, max, average, spread, standard deviation, and has four additional save slots – all of which retain the data when power is lost. It also has advanced features such as live graphing output, and voice readout – all of which are easily configured via a web interface.

Requirements
You’ll need this stuff to use the NateChrony – typically if you have a mobile phone you’re set!

  • If using a mobile phone/tablet, it should be less than 5 years old & up to date
  • Working knowledge of your device, including browser and internet technologies
  • Working knowledge of any additional security software installed on your device
  • A 5v standard USB power source
  • A device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet access
  • A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
  • You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu – Shoot, you hear the speed and power readout

NOTE: if you have software or settings on your device that do not permit this – you will need to change your settings.

Specifications

  • Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps
  • Resolution: <0.1fps shot to shot at 1,000fps
  • Air powered guns only
  • CO2 power can cause vapor, not recommended
  • Maximum caliber: ~45-50 cal (depending on power)
  • Maximum power: 150 fpe

Included with the NateChrony:

  • The Chronograph: The thing you pop on the end & shoot through
  • Premium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90degree connector
  • The Software: Either the standard software, or the Airsoft version of software
  • Barrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifle
  • Safety Carabiner: Allows you to secure the chrony for added safety or convenience
  • Soft Case: A carrying pouch to put it in
  • Test Pellet: A plastic pellet for the drop test
  • Phillips Driver: A phillips driver for the adapter grub screw

Click here to visit this product page on our website.

Working with data:

  • Massively flexible – whatever you can do with a web page, you can do with the NateChrony. You can directly print or share/email your results easily!

NateChrony SteadyShot Chronograph & Training Tool

Identical looking product to the NateChrony, but don’t be fooled, it has additional features.

Colors: Black Polymer, Black Aluminium, Stone Aluminium, English Oak Aluminium

The NateChrony SteadyShot

We took the latest NateChrony and added movement sensors to it. The SteadyShot has the capability to monitor all the movement of your muzzle, to give you insights to exactly what you’re doing – and when you’re doing it.
Are you steady? are you smooth? are you consistent? You can now know.

SteadyShot Features

As always we continue to develop and improve our products based on customer feedback. If there’s something you need or want – let us know.

The current set of SteadyShot features is (at least):

  • Monitor movement in 3 axis: left/right, up/down, back/forth
  • Graphs of movement: shows your movement on 3 separate graphs (1 per axis)
  • Zoom: drill into specific areas of your movement on the graphs easily
  • Score: scores for each axis of movement and a total score – allows you to measure and improve your form
  • 3D View: A highly intuitive view of what your movement was in 3 dimensions (PC/Laptop preferred for analysis)
  • Data: full export/download of all data, track your progress over time or work with coaches to improve your form

NOTE:  Key areas of development focus will be the 3D view and graphing.

Advanced Software

We have also added a lot of new features & capabilities to the NateChrony software, continuing to make our products even better. This not only applies to the SteadyShot features, but also the Chronographs capabilities. We’ve also added AirSoft specific features and capabilities.

New Features:

  • High rate of fire: up to 1,250 shots per second
  • Field mode: quickly determine if power is over or under 3 pre-configured limits without a display
  • AirSoft pages: specific pages for airsoft data, quick pellet change

Requirements

You’ll need this stuff to use the NateChrony – typically if you have a mobile phone you’re set!

  • If using a mobile phone/tablet, it should be less than 5 years old & have the latest software/updates installed
  • Working knowledge of your device, including browser and internet technologies
  • Working knowledge of any additional security software installed on your device
  • A 5v standard USB power source
  • A device (phone/tablet) that can remain connected to a Wi-Fi hotspot, when the hotspot does not have internet access
  • A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
  • You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu – Shoot, you hear the speed and power readout

NOTE: if you have software or settings on your device that does not permit the above – you will need to change your settings.

Specifications

  • Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps
  • Resolution: <0.1fps shot to shot at 1,000fps
  • Weight: 60g/72g (Polymer/Aluminium)
  • Save >1,000 shots across 5 save slots
  • Max speed: 2,500fps (software limit – can be increased)
  • Full export of all data to CSV/spreadsheet
  • Max rate of fire: 1,250 shots per second
  • SteadyShot capture time: 0.75-25sec (software config)
  • Air powered guns only
  • CO2 power can cause vapour, not recommended
  • Maximum caliber: ~50 cal (depending on power)
  • Maximum power: 150-200 fpe

Included with the NateChrony:

  • The Chronograph: The thing you pop on the end & shoot through
  • Premium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90 degree connector
  • The Software: Everything is installed on the SteadyShot, no apps or installations required on your device
  • Barrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifle
  • Soft Case: A carrying pouch to put it in
  • Test Pellet: A plastic pellet for the drop test
  • Phillips Driver: A phillips driver for the adapter grub screw

Click here to visit this product page on our website.

Screenshots:

NateChrony SmartTarget

The NateChrony SmartTarget

Add some smarts to your target!  Mount the NateChrony SmartTarget to the back of your existing targets, when the target is struck by an object & moves – the SmartTarget will detect the movement, register the shot, and based on the way your target moves – tell you approximately where the shot landed.

SmartTarget

The NateChrony SmartTartget has an inbuilt motion sensor that detects movement, by analyzing this movement it can detect being hit, and also the possible location of that hit. Mounting to a free moving target such as a hanging gong is highly recommended – as it can freely move in left-right and up-down directions.

The SmartTarget can be mounted to any surface, and used to detect any object – airguns, firearms, baseball… If you need to detect movement and strike location, the SmartTarget is for you.

The features will be rapidly improving as we get customer feedback and develop additional features.

Features:

  • Mounts to any target with double sided tape, or screws
  • Center hole on case to assist with accurate placement
  • Standard 10 ring target face display for shot placement
  • Score display
  • Match Mode: Track and save multiple shots
  • Calibration: can be adjusted to match every unique targets movement
  • Sensitivity: can be adjusted for low power/long range, or high power/short range
  • External Lights: ultra high brightness LED accessories available, so superb visibility at range
  • Programmable Lights: we can program any lighting effects you can imagine

Accessories:

  • Short Range/Cross: 5 LEDs in a cross with 60mm spacing for 50-100m range
  • Long Range LEDs: 4+2 or 10+2 LEDs that can be spaced at 600mm
  • DIY Lighting Kit: 10+2 LEDs that you can wire together to create custom designs Note: Accessories are optional

Requirements

You’ll need this stuff to use the SmartTarget – typically if you have a mobile phone you’re set!

  • A target: when struck at the extremities at the highest power, at the closest range – it should move/rotate approx. 45 degrees
  • A 5v USB power source: we recommend a quality USB power bank, 1×28650 will last ~8hrs
  • Solar panel (recommended): add a small ~2-5W panel to charge while its in the field
  • USB-C Cable: Choose a quality cable that’s long enough to get the battery away from the hit zone, 1m minimum recommended
  • If using a mobile phone/tablet, it should be less than 5 years old & up to date
  • Working knowledge of your device, including browser and internet technologies
  • Working knowledge of any additional security software installed on your device
  • A device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet access
  • A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
  • You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu – Shoot, you hear the speed and power readout

Specifications

  • Accuracy: TBA – we can measure left, very left, middle, right, very right. We’ll have approved target specifications shortly, to help you setup your target best
  • Outputs: Addressable LEDs (WS2812 compatible, 30mA max output), 5 additional programmable outputs – 3.3v logic @30mA
  • Power: USB C, 160mA consumption
  • Range: approx. 65m when behind 5mm steel plate, long range version with external antenna >500m

Included with the SmartTarget:

  • SmartTarget Module: the module that goes on the back of the target
  • The Software: No apps to install or permissions required

Click here to visit the product page on our website.

Click here to shop the Smart Target.

Click here to shop the Smart Target Accessories.

CONTACT US

We want to hear from YOU!  Whether your with the media, a prospective dealer, consumer, or just someone that wants to reach out, please use the form below and we’ll get back to you as soon as we can.  Thank you for taking the time to visit our booth!

Website: https://natechrony.com/

Location:  Sydney, Australia

WE LOVE AIRGUN SHOOTING SPORTS!

Gateway to Airguns is an open airgun community dedicated to the help and education of new and seasoned airgunners alike.  

Our tens of thousands of members engage in airgun topics focused on specific brands and models of airguns, as well as DIY products and how-to tutorials.  From the beginning the GTA  has been dedicated to the advancement of the great sport of airgunning.   

The GTA is growing faster than ever and helping a brand new generation of airgunners get the absolute most out of their airguns.  We can help consumers learn the important FACTS about products before they spend their hard earned cash. So please JOIN US at www.gatewaytoairguns.org.